Diastereoselective Synthesis of a Hydroazulene Derivative by Tandem Michael-Wittig Reactions

The reaction of a cyclic phosphonium ylide [ 1 ] with enoate 2 gives a hydroazulene derivative with stereoselectivity.     

Growth of large La2−xSrxCuO4 single crystals using tilting-mirror-type infrared heating image furnace

Large single crystals of La_2−xSr_xCuO₄ (LSCO) high-T_c superconductors were grown by the infrared heating floating zone (IR-FZ) method using a tilting-mirror-type image furnace. The maximum diameter of the LSCO crystals increased to 10 mm in the tilting-mirror-type image furnace from 6 mm in the conventional image furnace. CuO rich feeds were required for the crystal growth using the tilting-mirror-type image furnace to compensate for the lack of CuO caused by the significant evaporation of CuO during the growth. The evaporation of CuO was affected by the tilting angle of the mirrors of the image furnace and by feed diameter. The optimized growth conditions were as follows: mirror tilting angle, 20°; feed diameter, 10 mm∅; and feed composition 50.7 mol% CuO.     

Non-linear dielectric spectra of ferroelectric liquid crystals

Abstract

The non-linear dielectric relaxation spectroscopy has been recently developed and applied to soft materials such as polymers. We have applied this new method to the S*_C phases of some ferroelectric liquid crystals. Under a weak AC electric field, the original and third order harmonic frequency components of electric displacement are proportional to the first and third powers of the applied electric field, respectively. The linear spectrum obtained from the original frequency component shows the relaxation of Debye type and the third order non-linear spectrum shows the relaxation with an extended form of Debye type to the non-linear case. The third order non-linear dielectric increment is found to be negative, which implies that the dielectric non-linearity of the liquid crystal in the S*_C phase is due to the saturation of molecular dipole moments induced by the applied electric field. The temperature dependence of the linear and third order non-linear spectra in the S*_C phase are also studied. Both spectra do not change their forms much through the whole temperature range of the S*_C phase. In the vicinity of the S_A–S*_C transition temperature, the critical behaviour is more remarkable in the third order spectrum than in the linear one.     

Polymerization of 5-Substituted Cyclooctenes with Tungsten and Molybdenum Catalysts

Polymerizations of cyclooctene, 5-methyl, 5-chloro-, and 5-methoxycyclooctenes were studied. Cyclooctene (CO) and 5-methylcyclooctene (MCO) provided high polymers in 80% yield with the use of WCl₆/AlEti._B Cl_u5 or WCl₆/AlEtCl₂ catalyst. 5-Chlorocyclooctene gave oligomer in 50% yield with WCl₆/AlEt₂Cl catalyst. Neither polymer nor oligomer was produced from 5-methoxycyclooctene. These polymers were found to be produced through a ring-opening mechanism. The ratio of cis to trans structure in poly(CO) and poly(MCO) was determined by measurements of the decoupled ′H-NMR spectrum. Poly(CO) containing more than 50% trans structure was a crystalline solid at room temperature, while the polymer containing 30% of trans structure did not crystallize at room temperature. Poly(MCO) was amorphous, regardless of the content of trans structure. Poly(CO) and poly(MCO) obtained with MoCU/AlEtaCl or MoCU/AlEtCb catalyst contained no carbon-carbon double bond, and a vinyl polymerization mechanism was expected for this system.     

Electro-optic effect,propagation loss,and switching speed in polymers containing nano-sized droplets of liquid crystal

Polymers containing droplets of liquid crystal smaller than 100 nm, which have good transparency and easily form films, were prepared under various conditions to evaluate their potential as electro-optic materials for waveguide-type devices. By varying the liquid crystal concentration and the strength of the UV irradiation causing photo-induced phase separation of the droplets, we were able to control the droplet size and density. We have clarified how the birefringence generated in an applied electric field, switching speed, and optical loss of light propagating in the film depend on droplet size and density. Polymer materials having a large electro-optic effect (δn = 0.001 at 8 V μm^-1), low propagation loss (~2.5 dB cm^-1), and fast response time (~10 μs) have been developed.     

Synthesis and properties of novel 1,1‐difluoropropoxy‐linked liquid crystalline compounds of negative dielectric anisotropy

A series of liquid crystalline compounds having the difluoropropyleneoxy moiety (–OCF₂C₂H₄–) as a linking group has been synthesized. The physical properties, i.e. dielectric anisotropy, birefringence, viscosity and phase transition temperatures, have been measured. This novel class of compounds shows a larger negative dielectric anisotropy than the corresponding compounds having a propyleneoxy (–OC₃H₆–) linking group. Their dielectric properties may be explained by the combined effect of fluorine atoms with large electron negativities and the electron donating feature of an oxygen atom substituted on the same carbon atom. The semi‐empirical quantum calculation method (AM1) also confirmed this dielectric behaviour of the difluoropropyleneoxy linkage group.     

Preparation of various Janus composite particles with two components differently combined

Janus composite particles with a combination of organic and inorganic substances were synthesized by soap-free emulsion polymerization in which an amphoteric initiator of 2,2′-azobis[N-(2-carboxyethyl)-2-2-methylpropionamidine] (VA-057) was employed to introduce a polystyrene (PSt) lobe onto silica cores surface-modified with 3-methacryloxypropyltrimethoxy silane (MPTMS). Thermogravimetric analysis and X-ray photoelectron spectroscopy were used to characterize the surface-modified silica particles and showed that a small amount of MPTMS introduced onto the surface of silica particles could successfully prepare SiO₂–PSt Janus particles. The oxide part of SiO₂–PSt Janus particles obtained with the polymerization was further surface-modified with 3-aminopropyltriethoxysilane (APS) to introduce positively charged amino groups on the silica surface. The silica surface modified with APS was covered with gold by electroless deposition in which a gold precursor of auric chloride was reduced with ascorbic acid in the presence of polyvinylpyrrolidone. The electroless deposition of gold successfully produced Janus particles with a combination of gold and PSt surfaces. Furthermore, dissolution of the polymer component of the Au–PSt Janus particles in tetrahydrofuran led to another Janus type of particles with an inorganic combination of Au and SiO₂.     

Single‐Electron‐Transfer (SET)‐Induced Oxidative Biaryl Coupling by Polyalkoxybenzene‐Derived Diaryliodonium(III) Salts

Metal‐free oxidative C? C coupling by using polyalkoxybenzene‐derived diaryliodonium(III) salts as both the oxidant and aryl source has been developed. These salts can induce single‐electron‐transfer (SET) oxidation to yield electron‐rich arenes and subsequently transfer the polyalkoxyphenyl group into in situ generated aromatic radical cations to produce biaryl products. The reaction is promoted by a Lewis acid that activates the iodonium salts. It has been revealed that the reactivity of the salts under acidic conditions is quite different to their known behavior under basic conditions. The reactivity preference of a series of iodonium salts in the SET oxidation and their ligand transfer abilities have been systematically investigated and the results are summarized in this report.